Laser-cut hardboard Unisub coated sublimation earrings.
Each earring is 1/8" thick. You will not receive the hardware or jump rings for the earrings, those can be purchased online or at local craft stores. Earrings are sold in sets of 10. You will receive 20 earrings with your purchase.
These will arrive in 3 pieces. You attach using jump rings.
There may be slight browning around the edge on the protective film only when the protective film is removed, the substrate will be fine.
approx. 2" tall x 1.5" wide
approx. 1.5" tall x 1.14" wide
**REMOVE PROTECTIVE FILM**
Press image at 400 degrees for 60 seconds with medium pressure.
The recommended settings above for sublimation may need
adjustments for the best results. Sublimation settings will vary depending on the
heat press brand and model ink and paper and atmospheric conditions.
Please join our Facebook group for specials. https://www.facebook.com/groups/369226993413461
The front side is glossy sublimation side, back is dark hardboard for the single-sided blanks.